Services
Drywall installation, repair and taping, and plaster repair and finishing for walls and ceilings — prepared for the finish you want.
The finish level is agreed in the estimate, so the surface is ready for paint and expectations are clear.
New drywall for walls and ceilings — layout to minimize joints, correct fastening, corner bead and the finishing sequence through to a paint-ready surface.
Holes, cracks, water-damaged sections and dents are assessed, patched or replaced and blended into the surrounding surface so the repair disappears after painting. Water damage is repaired only after its cause is addressed.
Joint tape, compound coats and sanding take the surface to the agreed finish level — higher levels for smooth paint finishes and areas with strong side lighting.
Plaster walls and ceilings are repaired and refinished, including skim coating where suitable. Extensive failure, or plaster detached from its lath, is assessed before a repair approach is recommended.
Common situations — confirmed on site.
New walls and ceilings in finished spaces.
Openings left by plumbing or electrical work.
Plaster walls that need repair rather than replacement.
Patching and refinishing between tenants.
Inspect the walls or ceilings and agree the finish level.
Protect floors and furnishings and remove damaged material.
Hang, patch, tape or plaster as scoped.
Sand to a paint-ready surface and clean up dust.
Check the surface under good light with you.
Tile Installation A dated main bathroom stripped to the studs and finished with large-format porcelain floor tile, a full-height shower…
View case study Flooring An unfinished basement turned into a family room and home office with new drywall, a Level 4 finish, vinyl plank…
View case study
Drywall & Plaster An occupied office repainted after hours, with damaged corners repaired and new door casings installed — without…
View case studyEvery estimate lists what is included, so there are no surprises about what will be done.
Surfaces and substrates are assessed and prepared properly — the part of the job that decides how long it lasts.
Floors and furnishings are protected and the work area is cleaned up every day.
You always know who to call, and changes are agreed before they are made.
Small holes, dents and cracks can usually be patched and blended. Water-damaged, mouldy or badly broken sections are usually better replaced. The cause of water damage should be fixed first.
Finish levels (0 to 5) describe how much taping and compound work is done. Higher levels give a smoother surface for gloss paint or strong side lighting. The level is confirmed in the estimate so expectations are clear.
Plaster repair and skim coating can be part of the scope where suitable. Extensive plaster failure, or plaster that has come away from its lath, needs an on-site assessment before a repair approach is recommended.
Start your project
Tell us about the work. We reply within one business day with the next step — a site visit, a remote review or a written estimate.
